|
|
Basic Mechanism of Fatigue and Combined Fatigue/Creep Damage of Ni-based Superalloys MAR-M 247 and IN 713LC
Horník, Vít ; Kohout, Jan (referee) ; Pantělejev, Libor (referee) ; Kunz, Ludvík (advisor)
The thesis is focused on clarifying fatigue damage mechanisms and fatigue-creep damage mechanisms of MAR-M 247 and IN 713LC polycrystalline Ni-based superalloys. This thesis begins with basic information about nickel-based superalloys and their microstructure, followed by a description of fatigue and creep mechanisms and their mutual interaction. The next part contains experimentally obtained results describing the behavior of MAR-M 247 and IN 713LC superalloys under various sets of conditions. Three testing temperatures - 800, 900 and 950 °C were used for the measurement of fatigue properties under symmetrical loading cycle, because in the temperature range 800 – 950 °C, the mechanism of fatigue crack propagation of both superalloys should change from the originally crystallographic at "lower" temperatures (800 °C) to non-crystallographic at "higher" temperatures (950 °C). In addition the effect of processing technology on fatigue properties was studied on the superalloy IN 713LC. High-frequency cyclic loading (about 120 Hz) with high mean stress at elevated temperatures was applied to induce fatigue-creep interaction. The combined fatigue-creep loading was performed on the IN 713LC superalloy at 800 °C and on the MAR-M 247 superalloy at 900 °C.
|
|
| |
|
| |
|
|
Multistress ageing analysis of the electroinsulating materials
Jeřábek, Michal ; Frk, Martin (referee) ; Rozsívalová, Zdenka (advisor)
This diploma thesis deals with not-aged and thermally, electric and multistress aged slotted isolations dielectric properities experimental probing. Dutiny experiment is watched influence moisture on dielectric properties insulating materiále ISONOMŽNMN. Especially both two permitivity complex components are surveyed, in dependence on the frequency and the temperature changes during thermal, electric and multistress ageing. These characteristics are viewed in light of application the isolation in practice.
|
|
|
Analysis of multistress ageing on dielectric spectras of materials
Kučera, Miroslav ; Frk, Martin (referee) ; Rozsívalová, Zdenka (advisor)
Diploma thesis treat of effect of thermal, electrical and combined (thermal electrical) stress on electrical characteristics of insulation material ISONOM NMN which is used as a slot insulation in electric motors. To monitor the stress is used the method of dielectric relaxation spectroscopy. Under examinations are the resultant dielectric spectra which constitute the frequency dependencies of components of complex permitivity. Compared are the effects of particular stresses on dielectric spectra of surveyed insulative material.
|
|
|
Safety factor evaluation for an out-of-plane frame under static loading
Málek, Michal ; Profant, Tomáš (referee) ; Burša, Jiří (advisor)
This bachelor thesis deals with evaluation of safety factor of a space frame when being statically loaded. This examination was demonstrated on a particular example. In order to solve the above mentioned, we exploit the frame symmetry. Unknown parameters were identified from deformation conditions in the point of intersection of the symmetry plane and the frame centreline, where the shift and two turning angles equal zero, and further by means of Maxwell- Mohr variant of Castigliano's theorem for determination of the frame deformation. The basis for calculations of stresses was represented by the theory of combined bar loading, particularly combination of bending and torsion. When examining the frame safety we took into consideration mainly dangerous points possibly occuring through cranks and fixed supports, where stress concentration occurs. The results of analytical solution were verified by numerical calculation in program ANSYS 10.0.
|
|
| |
|
| |
|
|
Basic Mechanism of Fatigue and Combined Fatigue/Creep Damage of Ni-based Superalloys MAR-M 247 and IN 713LC
Horník, Vít ; Kohout, Jan (referee) ; Pantělejev, Libor (referee) ; Kunz, Ludvík (advisor)
The thesis is focused on clarifying fatigue damage mechanisms and fatigue-creep damage mechanisms of MAR-M 247 and IN 713LC polycrystalline Ni-based superalloys. This thesis begins with basic information about nickel-based superalloys and their microstructure, followed by a description of fatigue and creep mechanisms and their mutual interaction. The next part contains experimentally obtained results describing the behavior of MAR-M 247 and IN 713LC superalloys under various sets of conditions. Three testing temperatures - 800, 900 and 950 °C were used for the measurement of fatigue properties under symmetrical loading cycle, because in the temperature range 800 – 950 °C, the mechanism of fatigue crack propagation of both superalloys should change from the originally crystallographic at "lower" temperatures (800 °C) to non-crystallographic at "higher" temperatures (950 °C). In addition the effect of processing technology on fatigue properties was studied on the superalloy IN 713LC. High-frequency cyclic loading (about 120 Hz) with high mean stress at elevated temperatures was applied to induce fatigue-creep interaction. The combined fatigue-creep loading was performed on the IN 713LC superalloy at 800 °C and on the MAR-M 247 superalloy at 900 °C.
|
|
| |
guest ::
